 | | | | |
|
Ta strona nie jest dostępna w następującym jezyku: 'Polski'. Z tego powodu zostanie ona zaprezentowana w języku angielskim.
 The close and successful co-operation between Hiflex and Komori was established with the worldwide first real-life JDF-connectivity MIS / Komori printing.
More real-life
projects followed further proving the efficiency of the JDF-link between the two systems. JDF-integration between Hiflex / Komori has repeatedly been awarded with the CIP4
(CIPPI) Innovation Awards. |
|
The status quo of JDF-connectivity between Hiflex and Komori is regularly shown in the Komori democenter in Utrecht (Netherlands), Chicago (USA) and Leeds (Great Britain)
as well as in the Hiflex CIM Center (Aachen). |
|
The JDF enabled production management system of Komori is called K-Station. The JDF files generated by Hiflex are forwarded to the presses through this software solution
which also continuously feeds back messages on production status to Hiflex via JMF. |
 The planning of the job sequence in Hiflex Scheduling application provides the basis for the JDF data transfer to the printing presses. An exact description of the
production sequence is generated during preliminary calculations and initial job costing. Last minute modifications are captured in Hiflex Estimate and are automatically
available for pre-set data that is sent to Komori K-Station via the JDF interface.
As soon as the job is ready to print, Komori K-Station's control system receives job information (e.g. customer name, job number, product description) and relevant printing
parameters (format, paper, run length, number of plates and inks) via JDF from the Hiflex MIS. Feedback from production (progress on the job (in percent), good sheets and
waste, speed, and status of the machine) automatically flows back into Hiflex Scheduling and Hiflex SFDC (Shop Floor Data Collection) and constantly updates the MIS.
JMF feedback as received from Komori K-Station is, for instance, displayed in real-time in the digital planning board of Hiflex Scheduling, so that the scheduler
and the CSR are always up-to-date about the current status of the job. This provides essential transparency in order to manage production with highest flexibility
and efficiency. Moreover, it provides an exact data pool for job costing analysis (cost finding and historic costing). |
Ta strona nie jest dostępna w następującym jezyku: 'Polski'. Z tego powodu zostanie ona zaprezentowana w języku angielskim.
 Norwegian offset printer implements HIFLEX MIS and JDF between five different vendors' systems and realizes ROI of 1847% . PDC Tangen from Oslo is the first Scandinavian
printer that implemented JDF connectivity. Starting early in 2006, they to date have realized most convincing results of process automation implementation which earned them
the 2007 CIPPI Award in the category "Best cost/benefit realization as a result of process automation implementation". The case story of PDC Tangen revealed impressive
benefits of the JDF implementation: an increase in the turnover by 20% (+ EUR 5.2 Mio / NOK 40,6 / USD 7,17), a productivity increase of 25% on the presses and 15% on the
folding machines. The profit after taxes was improved by almost 900%. Calculated on a five year period, the competitive advantage due to process automation amounts to
EUR 5.180.906 / NOK 40,490,404 / USD 7,131,880 and the investment pays itself back 20 times. The CIP4 Award places the offset printer from the North amongst the world-wide
most successful users of process automation technology.
Kontynuuj czytanie artykułu "PDC Tangen and Hiflex - A JDF Success Story from the North" tutaj. |
Ta strona nie jest dostępna w następującym jezyku: 'Polski'. Z tego powodu zostanie ona zaprezentowana w języku angielskim.
 CIP4 Innovation Awards 2007 again honoured three HIFLEX users. The CIP4 Innovation Awards are given to the world-wide most successful users of process automation technology.
For the third year in succession, HIFLEX users won two out of three categories and achieved second place in the remaining.
Kontynuuj czytanie artykułu "Unbeaten CIPPI Award Success for Hiflex Users" tutaj. |
Ta strona nie jest dostępna w następującym jezyku: 'Polski'. Z tego powodu zostanie ona zaprezentowana w języku angielskim.
 PDC Tangen in Norway is completely networked - from administration to bookbindery.
When a Norwegian child picks up a schoolbook or children's book, it has most likely come from Aurskog, a small city about 20 miles east of Oslo. This is where PDC Tangen,
the largest Norwegian sheetfed offset printer, is located. Annually, PDC Tangen prints about 1,500 books and illustrated books, circa 120 periodicals, as well as brochures and
annual reports. PDC stands for Print Data Center and Tangen is the name of a recently acquired print shop. The company is larger than the second and third ranking firms in the
Norwegian market combined and the first Scandinavian printer that implemented JDF.
Kontynuuj czytanie artykułu "A Perfect Workflow as if by Magic" tutaj. |
This page is not available in 'Polski'. Therefore we show you the German version:
 Vernetzungs-Pioniere wie z. B. die in Deutschland ansässigen Unternehmen Druckhaus Berlin-Mitte, Kraft Druck und Mediengruppe Universal berichten über
Produktivitätssteigerungen von 10 bis 20 %. Auch die belgische Druckerei Tanghe Printing NV profitiert von der Prozessautomatisierung.
Kontynuuj czytanie artykułu "Was JDF leistet" tutaj. |
Ta strona nie jest dostępna w następującym jezyku: 'Polski'. Z tego powodu zostanie ona zaprezentowana w języku angielskim.
 Belgium offset printer successful in the 2006 CIPPI Awards. End of 2002 Patrick Tanghe, CEO of Tanghe Printing NV, decided to start a CIM project
(Computer Integrated Manufacturing) for his company. The goal was to integrate all organisational and technical IT functions that are related to the
production processes in one central IT system (the HIFLEX MIS). In order to automate processes this system should make joint usage of all data relevant
to production. Since the go-ahead four years ago Tanghe Printing NV has increased its total turnover by 45 percent (2006: EUR 4.8 Mio.) while simultaneously
reducing the workforce of around 35 to 23 people.
Kontynuuj czytanie artykułu "Tanghe Printing Benefits from Investment into JDF" tutaj. |
Ta strona nie jest dostępna w następującym jezyku: 'Polski'. Z tego powodu zostanie ona zaprezentowana w języku angielskim.
 Panel of experts honors three HIFLEX users for their JDF-projects. The CIP4 International Print Production Innovation (CIPPI) Award for printers,
who successfully networked their production, goes once again to three honored HIFLEX users for the 2006 awards. These official awards are announced for
three categories. As in 2005, HIFLEX customers were nominated in all three categories, won two awards, and were given an exclusive honorable mention in the third.
Kontynuuj czytanie artykułu "Hiflex customers win CIPPI-Award 2006" tutaj. |
Ta strona nie jest dostępna w następującym jezyku: 'Polski'. Z tego powodu zostanie ona zaprezentowana w języku angielskim.
The Belgium printing company Tanghe Printing NV has converted to networked production. In January the company
started with the MIS system HIFLEX and only two months later, in March, the JDF connectivity to their Komori
presses went online. The effects are time and cost savings through single data entry points, more transparency on
production status and an increased productivity on the press.
Kontynuuj czytanie artykułu "JDF: providing a competitive edge" tutaj. |
|
| |
